• Product Name:Transmission
• Material:ABS, POM, PC, Aluminum
• Size:400 × 150 × 200
• Processing Method:3-Axis + 5-Axis Machining
• Points:Visualization, Resin Plating Finish, Assembly

• Product Name:Origami Crane
• Material:Aluminum (2017)
• Size:150 × 60 × 90
• Processing Method:Simultaneous 5-Axis Machining
• Points:Thin-Wall Cutting (Wall Thickness 0.5)

• Product Name:Motorcycle Fuel Module
• Material:POM (N)
• Size:90 × 100 × 90
• Processing Method:3-Axis + 5-Axis Machining
• Points:Deep Pocket Machining

• Product Name:Propeller (Spiral)
• Material:POM (Black)
• Size:Φ80 × 40
• Processing Method:Simultaneous 5-Axis Machining
• Points:One-Piece Machining

• Product Name:Impeller
• Material:Clear Acrylic
• Size:Φ80 × 40
• Processing Method:Simultaneous 5-Axis Machining
• Points:Thin-Wall Cutting, Mirror Polishing

• Product Name:Resin Frame ①
• Material:PBT-GF30%
• Size:170 × 120 × 50
• Processing Method:3-Axis Machining
• Points:Insert Molding Dummy

• Product Name:Catch Tank
• Material:PPS-GF40%
• Size:170 × 90 × 100
• Processing Method:Indexed 5-Axis Machining
• Points:10-Side Machining

• Product Name:Insulator ①
• Material:PPS-GF40%
• Size:Φ60 × 40
• Processing Method:3-Axis Machining
• Points:Thin-Wall Cutting (Wall Thickness 0.3), Deep Pocket Machining

• Product Name:Insulator ②
• Material:PA66-GF30%
• Size:Φ50 × 20
• Processing Method:3-Axis Machining
• Points:Thin-Wall Cutting (Wall Thickness 0.3), Micro Machining

• Product Name:Brush Holder
• Material:PA66-GF30%
• Size:40 × 30 × 40
• Processing Method:3-Axis Machining
• Points:Micro Machining, Small Diameter End Mill Cutting

• Product Name:Resin Frame ②
• Material:PBT-GF30%
• Size:170 × 90 × 60
• Processing Method:3-Axis Machining
• Points:High-Precision Cutting of Glass-Filled Resin

• Product Name:Logo Lens
• Material:Clear PC
• Size:150 × 70 × 20
• Processing Method:3-Axis Machining
• Points:Lens Cut

• Product Name:Power Seat Motor Frame
• Material:PA66-GF30%, Clear PC
• Size:220 × 130 × 60
• Processing Method:3-Axis Multi-Surface Machining
• Points:Visualization Model

• Product Name:U-Mark (Processing Sample)
• Material:ABS, Clear PC
• Size:Φ90 × 20
• Processing Method:3-Axis Machining + Secondary Processing
• Points:Resin Plating, Vacuum Deposition Plating, Painting

• Product Name:Steering Wheel
• Material:Chemiwood (Sun Module)
• Size:240 × 300 × 230
• Processing Method:3-Axis + 5-Axis Machining
• Points:Design Verification Model

• Product Name:Tire/Wheel
• Material:Clear Acrylic, ABS (Black), ABS (White)
• Size:Φ180 × 100
• Processing Method:3-Axis + 5-Axis Machining
• Points:Mirror Polishing, 5-Axis Tire Groove Machining

• Product Name:Tissue
• Material:POM (N)
• Size:150 × 100 × 40
• Processing Method:3-Axis Machining
• Points:Thin-Wall Cutting (Wall Thickness 0.2)

• Product Name:Drum
• Material:PBT-GF30%
• Size:Φ40 × 20
• Processing Method:5-Axis Machining
• Points:Internal Gear, Machining Radius 0.2

• Product Name:Two-Stage Gear
• Material:POM (Blue)
• Size:Φ40 × 40
• Processing Method:5-Axis Machining
• Points:One-Piece Machining, Helical Gear, Module 0.8

• Product Name:Resin Gear
• Material:POM (N), POM (Black)
• Size:Φ40 × 40
• Processing Method:5-Axis Machining
• Points:One-Piece Machining, Gear

• Product Name:Logo Sample
• Material:MU-872 (Transparent Type)
• Size:200 × 90 × 20
• Processing Method:Vacuum Casting
• Points:Mixed Coloring

• Product Name:Resin Cover ①
• Material:MU-858 (Flame Retardant V-0 Type)
• Size:180 × 140 × 50
• Processing Method:Vacuum Casting + Surface Treatment
• Points:Textured Painting

• Product Name:Resin Cover ②
• Material:MU-858 (Flame Retardant V-0 Type)
• Size:200 × 100 × 100
• Processing Method:Vacuum Casting
• Points:Insert Casting